E011 on a Bosch oven is a door-lock fault — the oven tried to lock or unlock the door (usually around a self-clean cycle) and the lock didn't reach its position, so the control flags it and often leaves the door stuck. Most of the time it clears once the oven has cooled and been reset. Here's how to get it open safely, and what it means if it stays.
The oven keeps the door locked until the inside cools below a safe temperature after self-clean, and it can flag E011 if it checks the lock before that.
Check it: Let the oven cool completely (up to 60–90 minutes after self-clean). Many times the lock releases and E011 clears on its own once it's cool.
The lock motor runs on a control signal; a glitch can leave it stuck mid-travel with E011 showing even after it's cool.
Check it: With the oven cool, unplug the range (or flip its breaker) for 5 minutes, then restore power. The reset re-runs the lock cycle and often frees the door and clears E011.
The real mechanical cause. The lock has a small motor and switches; when it jams or fails it can't reach the locked/unlocked position, so the control throws E011.
Check it: If the oven is cool and a reset didn't clear it, the lock motor/assembly is the likely fix — a tech replaces it.
A failed position switch (which tells the control the lock reached its spot) or a loose connector reads like a lock that never got there.
Check it: A tech tests the lock switch and its wiring after ruling out the motor.
Usually repair — most E011s are just cooling or clear with a reset (free). If the lock motor/assembly failed, it's an affordable common part with flat labor, well below a new oven.
In Middle Tennessee or the Baton Rouge area? We'll come to you, same-day. Anywhere else in the U.S.? Send a 10-second video, a real technician tells you exactly what's wrong for $50 (credited toward the repair), and we ship you the exact part. 24/7 — text, call, or upload anytime.
First let it cool completely — after a self-clean the oven won't release the door until it's below a safe temperature, and E011 often clears then. If it's cool and still showing E011, unplug the range (or flip the breaker) for 5 minutes to reset it; that re-runs the lock cycle and usually frees the door. If it stays, the door lock motor/assembly has failed and gets replaced. Never force the door.
E011 means the lock didn't reach its position. If it's fully cool and a reset didn't release it, the self-clean lock motor or its switch has failed and is holding the latch — an affordable, common repair.
Usually yes — it's often free (cooling or a reset), and even a failed lock assembly is an affordable part. Your $50 Quick Check credits toward the repair so you know the cost first.